Precautions for Using Handheld Laser Welder

When using handheld laser welders, workers should pay attention to the following matters:

1. Preparation before work

Safety protection: Be sure to wear radiation-proof glasses and special safety protective clothing to ensure personal safety.

2. Welding machine protection measures

Avoid mixing with other welding machines: Do not use the handheld laser welder with arc welding machines (such as argon arc welding, spot welding) at the same time to avoid circuit backflow from damaging the internal parts of the laser welding machine.

3. Precautions during operation

Avoid pointing directly at the human body: During the operation of the handheld laser welder, be sure to ensure that the laser welding head does not point to any part of the body to prevent accidental injury.

Prevent dust contamination: Do not place the welding head directly on the ground or other unclean surfaces to prevent dust from entering and affecting equipment performance.

Optical fiber protection: Pay attention to the bending radius of the optical fiber corrugated tube and avoid excessive bending to prevent damage or burnout of the optical fiber.

4. Maintenance after use

Standby and shutdown: If you need to leave the work station temporarily, please click the "Standby" button to put the device into standby mode; when you are off work, please press the "Standby" button first, and wait until the handheld laser welder stops completely before shutting down.

By following the above precautions, you can ensure the safe, efficient use of your handheld laser welder and extend its service life.